Author: anisoadm

The outer reinforced perimeters count is the number of perimeters which will reinforce outer surface(not holes) of a part.

The plastic perimeters count is the number of perimeters which build the plastic internal shell. It provides solidity of part surface.

The external shell perimeters is the number of perimeters which build the plastic external shell – the most precise one.

The generate reinforced perimeters flag is the flag which indicates that the Aura will generate reinforced perimeters for printed parts.

The use fiber flag is the flag which indicates that parts may be reinforced with fiber.

The cooling fan index is the number of this cooling fan in printer firmware.

The cooling fan index is the number of this cooling fan in printer firmware.

The has cooling fan flag is the flag which indicates thar extruder has a nozzle cooling fan.

The cut G-code is the code, that actuates fiber cutting. This value should be set only by printer manufacturer.

The fiber restart length is the length of fiber extrusion during restart. This is necessary for the fiber tail to get out of the nozzle. This parameter should be greater than or equal to the cut distance. For Anisoprint Composer this parameter is lagrer than the cut distance for 1-2mm.