The distance from part is the distance between skirt and part.
Month: December 2018
Loops count
The brim loops count is the number of brim loops around a part. The more loops, the adhesion between parts and a table is stronger.
Extrusion width coefficient
The extrusion width coefficient is the nozzle diameter multiplication factor. That is extrusion width = nozzle diameter * coefficient.
Fill angle (°)
The fill starting angle is the angle of infill rotation.
Fill pattern
Fill pattern. You could choose from three patterns: lines, grid or triangles, depending on your preferences.
Printing speed (mm/sec)
The printing speed is the speed which will be applied to plastic infill printing. Set this parameter as high as possible to speed up printing process.
Extrusion width coefficient
The extrusion width coefficient is the nozzle diameter multiplication factor. That is extrusion width = nozzle diameter * coefficient.
Fill angle offset (°)
The fill angle offset is the offset angle which is added to current infill rotation angle on each layer. For example, if fill angle offset is 10°, on first macro layer angle is 0°, on second is 10°, on third is 20° etc.
Fill starting angle (°)
The fill starting angle is the starting angle of infill rotation.
Printing speed (mm/sec)
The printing speed is the speed which will be applied to plastic infill printing. Set this parameter as high as possible to speed up printing process.